Print | 
Send To Friends |
Add To Favorites |
Comment
Cisco CCNA / CCNP Home Lab Tutorial: Buying And Configuring An Access ServerBy: Chris Bryant, CCIE #12933Article Word Count: 875 words [Comments (0)] Total Views: 18 Views |
|
Once you have more than two devices in your home lab, though, you'll realize that constantly moving the console cable around from one router to another gets very tiresome. That's what an access server does for a home lab - it allows you to connect your PC to a single device when working in your home lab, with no need to constantly disconnect and reconnect the console cable. The console cable will be connected directly to the access server, and the access server is connected to all the other devices in your home lab. Once you start working with one, you'll wonder how you got along without it! The term "access server" is a little misleading. This is not a server in the traditional sense, it's a Cisco router with asynchronous serial ports. It is these ports that you'll use to connect to the other devices in your home lab. Two affordable models of access servers are Cisco 2509s and Cisco 2511s. They can be found on ebay as well as other vendors on the Net. You will also need an octal cable. On one end, the cable has a large connector that will connect to the access server. The other end is actually eight separate cables, each with RJ-45 connectors. These connectors are numbered 1 - 8 and will be connected to the console port on each router and switch. It is important to note the number on each connector you're connecting to the other lab devices. Now that you've got the physical equipment, let's take a look at a typical configuration of an access server: no service password-encryption no service udp-small-servers no service tcp-small-servers ! hostname BRYANT_ADVANTAGE_AS4 no ip domain-lookup ip host r1 2001 10.4.4.4 ip host r2 2002 10.4.4.4 ip host r3 2003 10.4.4.4 ip host sw1 2004 10.4.4.4 ip host sw2 2005 10.4.4.4 ip host FrameSwitch 2006 10.4.4.4 interface Loopback555 ip address 10.4.4.4 255.255.255.0 line con 0 exec-timeout 0 0 logging synchronous\ line 1 16 no exec transport input all You can assign any loopback address and number here the important thing to note is that the IP HOST table you will build constantly refers back to the loopback address on the access server. In this configuration, I have the octal cable's connector 1 in R1, 2 in R2, 3 in R3, 4 in SW1, 5 in SW2, and 6 in my frame relay switch. The number "2001" in the first line of the IP HOST table refers to that connector. That's why it is important to note the number on a given connector you place in the console port of a router or switch. The asynchonous lines are identified by "line 1 16". This access server has 16 possible connections many will just have 8, which is usually plenty. Regardless of how many lines you have, you'll need the commands transport input all and no exec to allow reverse telnet to work effectively. There's one more thing to watch out for. When you first connect to the AS for a practice session, you will need to open the line to each device by using the full hostname of the device as shown in the IP HOST table. Here, you would begin by entering R1, R2, R3, SW1, SW2, and FrameSwitch to open the line to each device. After that, you need to enter the line number - 1, 2, 3, 4, 5, and 6. It sounds a little confusing at first, but after just a few minutes of practice you'll be doing it without even thinking about it. When you are working in your home lab, you will not go from one device to another that is, when you are done on R1 and want to configure R2, you must go back to the access server and then to R2. The keystroke to do this is . Again, it may sound complicated, but after a little practice you will again do this without thinking about it. Adding an access server to your CCNA or CCNP home lab may not be on your mind now, but once you add a few more routers or switches to the lab, you'll want to spend more time configuring and practicing and less time moving a cable around. And once you get one, you'll wonder how you did without it! Article Source: http://www.articledashboard.com
|
Print |
Send To Friends |
Add To Favorites |
Comment
Related articles
Cisco CCNA / CCNP Certification: OSPF E2 vs. E1 Routes By: Chris Bryant, CCIE #12933 - OSPF is a major topic on both the CCNA and CCNP exams, and it's also the topic that requires the most attention to detail.
Cisco CCNA / CCNP Certification: How And Why To Build An Etherchannel By: Chris Bryant, CCIE #12933 - CCNA and CCNP candidates are well-versed in Spanning-Tree Protocol, and one of the great things about STP is that it works well with little or no additional configuration.
Passing The CCNA and CCNP Exams: Setup Mode By: Chris Bryant, CCIE #12933 - CCNA and CCNP candidates need to know all about Setup Mode, why a router goes into that mode, and as you'll see, how to get out of that mode.
Passing Cisco's CCNA and CCNP Exams: Five Tips For Exam Day Success By: Chris Bryant, CCIE #12933 - As you get ready to pass the CCNA or CCNP exams, you can feel quite a bit of stress as you enter your last week of study.
CCNA / CCNP Home Lab Tutorial: The VLAN.DAT File By: Chris Bryant, CCIE #12933 - CCNA and CCNP candidates who have their own Cisco home labs often email me about an odd situation that occurs when they erase a switch's configuration.
Passing CiscoÂ’s CCNA and CCNP Exams: Traceroute By: Chris Bryant, CCIE #12933 - In preparation for your CCNA and CCNP exam success, you've got to learn to troubleshoot Cisco routers.
Passing Cisco CCNA And CCNP Exams: Ping And Extended Ping By: Chris Bryant, CCIE #12933 - I often tell CCNA and CCNP candidates that you do your best learning when you screw something up.
Passing The Cisco CCNA Exam: An Illustrated Guide To Router Modes By: Chris Bryant, CCIE #12933 - When you're getting started on your CCNA studies, learning the different router modes is key to passing your Intro and ICND exams.
Cisco CCNA / CCNP Home Lab: Why You Need An ISDN Simulator By: Chris Bryant, CCIE #12933 - ISDN is a vital topic for today's CCNA and CCNP candidates, especially for the ICND and Intro exams - you've got to know ISDN inside and out to pass those exams.
Passing Your CCNA and CCNP: Configuring And Troubleshooting Router-On-A-Stick By: Chris Bryant, CCIE #12933 - For CCNA and CCNP candidates, it's hard not to laugh the first time you hear the phrase "router on a stick".
Passing The CCNA And CCNP: Cisco Home Lab FAQ By: Chris Bryant, CCIE #12933 - There is a real revolution today among CCNA and CCNP candidates.
How To Earn CiscoÂ’s Firewall Specialist Certification By: Chris Bryant, CCIE #12933 - Security is a hot topic in today's networks, and will continue to be for a long time to come.
Passing The CCNA and CCNP: Three Myths About Cisco Exams By: Chris Bryant, CCIE #12933 - One of the drawbacks to the Internet is that it allows myths and "friend of a friend" stories to spread quickly, and usually the story becomes more exaggerated as it's passed along.
Passing The CCNA and CCNP: Home Lab Shopping On Ebay By: Chris Bryant, CCIE #12933 - Whether you're just getting ideas for your Cisco home lab or adding to your existing lab, ebay is a great place to get ideas for your lab as well as pick up some great bargains.
Securing Your Network And Your Career With Cisco's CCSP Certification By: Chris Bryant, CCIE #12933 - You don't need me to tell you that security is the #1 concern in today's networks.
Search the Articles
Subscribe
Receive alert message from us when new articles submitted to our site for free.
Categories
- +/- Advice
- +/- Animals
- +/- Automobiles
- +/- Business
- +/- Career
- +/- Communications
- +/- Computer Programming
- +/- Computers
- +/- Entertainment
- +/- Environment
- +/- Family
- +/- Fashion
- +/- Finance
- +/- Food
- +/- Health & Medical
- +/- Home & Garden
- +/- Humor
- +/- Internet Business
- +/- Internet Marketing
- +/- Legal
- +/- Leisure & Recreation
- +/- Marketing
- +/- Other
- +/- Politics
- +/- Reference & Education
- +/- Religion
- +/- Self Improvement
- +/- Sports
- +/- Technology & Science
- +/- Travel
- +/- Writing
Syndicates
                   |